Thursday, February 3, 2022
Thursday, January 13, 2022
CoC/BA: Morris CS9 Armoured Car
Another reinforcment for my Commonwealth troops, a Morris CS9 Armoured Car.
This is a 1/48 model from 1st Corps to which I added some details like a tarp rolled from Grrenstuff, camouflage net made from a piece of gauze bandage and some crates and jerry cans.
Deutsche Version
Weitere Verstärkung für meine Commonwealth-Truppen, diesmal in Form eines Morris CS9 Panzerspähwagens.
Das Modell stammt aus der 1/48-Reihe von 1st Corps, dem ich dann noch ein paar Details hinzugefügt habe:
Ein Tarp/Decke, das ich aus Greenstuff gerollt habe, ein Tarnnetz aus einem Stück Mullbinde und noch ein paar Kisten und Kanister.
CoC/BA: Ordnance QF 25-Pounder
Last but for sure not least another addition to my Commonwealth forces - the famous QF Ordnance 25-Pounder!
Usually part of the supporting artillery it was used as a stop gap in the anti-tank role until the 6-Pounder was available in numbers, because the 2-Pounder couldn´t stop the heavier armoured German tanks like the Pz III G, or the Pz IV.
And as such it was used not only in North Africa but in the Levante during Operation Exporter too: as the only gun that was able to stop the French R35 tanks frontally.
The gun model is from Warlord Games to which I added a rope, a self-bent towing eye, ammunition crates, used cartridges and so on.
Crew is a mixture of Perry Miniatures, Warlord and 3D printed from Studio Grozny.
Deutsche Version
Zu guter Letzt noch eine weitere Ergänzung für meine Commonwealth-Truppen - der berühmte QF Ordnance 25-Pounder!
Normalerweise Teil der Artillerie-Truppe, wurde er als Lückenfüller in der Panzerabwehr eingesetzt, bis der 6-Pounder in größerer Stückzahl zur Verfügung stand, denn der 2-Pounder konnte die schwerer gepanzerten deutschen Panzer wie den Pz III G oder den Pz IV nicht aufhalten.
Und in dieser Rolle wurde der 25-Pounder nicht nur Nordafrika, sondern auch in der Levante während der Operation Exporter eingesetzt, da nur er in der Lage war, die französischen R35-Panzer frontal zu stoppen.
Das Modell selbst stammt von Warlord Games und wurde um ein Seil, eine selbstgebogene Abschleppgöse, Munitionskisten, abgefeuerte Kartuschhülsen und so weiter ergänzt.
Die Besatzung ist eine Mischung aus Perry Miniatures, Warlord und 3D-Druck von Studio Grozny.
CoC/BA: Ordnance QF 6-Pounder
And so it continues with the reinforcements of the anti-tank stand for the Commonwealth: A QF Ordnance 6-Pounder is ready for duty in the Middle East/North Africa.
Historically, it will be used in North Africa starting from April 42, so it would not be usable for my main settings Crete and Operation Exporter, but in the corresponding games I could simply declare it as a 2-pounder, or even as a 25-pounder, if the need arise ;-)
The model is from Warlord Games, the crew completely from Perry Miniatures.
Deutsche Version
Und weiter geht es mit der Verstärkung des PaK-Riegels für das Commonwealth: Ein QF Ordnance 6-Pounder ist bereit für seinen Dienst im Mittleren Osten/Nordafrika.
Historisch wird er ab April 42 in Nordafrika zum ersten Mal eingesetzt, für meine Haupt-Settings Kreta und Operation Exporter wäre er also nicht verwendbar, aber sollte eine weitere PaK benötigt werden, könnte ich ihn einfach als 2-Pounder, oder auch als 25-Pounder deklarieren ;-)
Das Modell stammt von Warlord Games, die Crew komplett von Perry Miniatures.
CoC/BA: Ordnance QF 2-Pounder
Back to my beloved long-term projects again: Operation Exporter (with possible excursions to North Africa).
For the Australians, the infantry as such is finished, but for the supports the most urgently needed anti-tank guns and vehicles are still missing, on which I will now concentrate over the next weeks, or even months.
First of all, an Ordnannce QF 2-pounder has been completed.
At the beginning of the war in North Africa and the Levant the predominant anti-tank gun on the Commonwealth side, as the 6-pounder was not yet available.
The model and 2 of the artillerymen are from Warlord Games, the other 3 of the crew are 3D prints.
Deutsche Version:
Zurück zu meinem Lieblingsprojekt: Operation Exporter (mit möglichen Abstechern in Richtung Nordafrika)
Für meine Australier ist die Infanterie bis auf wenige Extras fertig (es fehlen noch Pioniere etc.), aber bei den Supports fehlen vor allem noch dringend benötigte PaK und Fahrzeuge, auf die ich mich jetzt in den kommenden Wochen, oder sogar Monaten, konzentrieren werde.
Als erstes ist ein Ordnannce QF 2-Pounder fertig geworden, zu Beginn des Krieges in Nordafrika und der Levante die vorherrschende PaK auf Seiten des Commonwealth, da der 6-Pounder noch nicht verfügbar war.
Das Modell und 2 der Artilleristen sind von Warlord Games, die anderen 3 der Crew sind 3D-Drucke.
Thursday, August 26, 2021
Finnish Platoon: 1st Squad and MMG-Team ready
My 1st squad of Finnish Soldiers for the Winter War or Talvisota, as it is called in Finland (the First Soviet-Finnish War 1939/1940) is ready for a game, including some support in the form of a MMG.
At the same time it was my first try doing some winter bases, using materials from AK and Scale75. Not too bad for the first try, isn´t it?
These are 3d printed miniatures and it was just pure fun to paint them, the sculptor of these fantastic and incredible detailed miniatures is @Propylene Foliescu, highly recommended!
Deutsche Version
Mein erstes Squad Finnen für den Winterkrieg (1. Sowjetisch.Finnischer Krieg 1939/1940), oder Talvisota, wie er in Finnald heißt ist bereit für ein Spiel, inklusive dem ersten Support in Form eines MMG.
Außerdem habe ich mich das erste Mal an winterlichen Basen versucht und dabei verschiedene Materialien getestet und dann letztlich eine für mich funktionierende Mischung aus Produkten von AK Interactive und Scale75 gefunden - nicht übel für den ersten Versuch, würde ich sagen, oder?
Die Figuren sind 3D-Drucke, super detailiert und liessen sich echt klasse bemalen, Sculptor der Reihe ist Propylene Foliescu, echt empfehlenswert!



















